10,000 Watt Modified Sine Power Inverter 12vDC to 120vAC

Feautures:

• 10000W max continuous power.
• Modified sine wave with Pulse Width Modulation technology (soft start).
• Volt meter on front panel to monitor your battery voltage.
• Amp meter on front panel to monitor your current use (rate at which battery is drained).
• Over Temperature LED indicator.
• Over Load LED indicator.
• AC direct connect terminal block.
• On/off switch.
• Over Temperature protection.
• Over Load protection.
• Single cooling fan thermally controlled.
• Internally fuse protected.
• AC output short circuit protection.
• Auto reset on most fault conditions.
• Aluminum case for optimal cooling.
• Pre-wired for remote on/off switch.
• Pre-slotted mounting plate.
• Instruction manual.
• Free 1 year tech support.
• 1 Year Warranty Parts and Labor.

Specifications:

• Continuous output power: 10000 Watts.
• Surge power capability (peak power): 20000 Watts.
• dc input / operating voltage: 10 to 16 Volts.
• Output voltage: 120 Volts ac +/- 10%.
• Output wave form: modified sine wave with phase correction.
• Output frequency: 60 Hz +/- 1 Hz.
• Battery low voltage alarm: 10.5 +/- 0.5 Volts.
• Battery low voltage shutdown: 10.0 +/- 0.5 Volts.
• No load current: < 1.8 DC amps.
• Full load efficiency: 90%.
• 1/3 load efficiency: 95%.
• No load minimum operating temperature: 30ºF.
• Full load maximum operating temperature: 140ºF (automatic shutdown).
• AC Output Socket Type: quadruple Type 2 -3 prong.
• High input voltage protection: 15V-17V.
• Low input voltage shutdown: 10V Internal fuse protection.
• Product size (L x W x H): 21 3/8 x 7 7/8 x 6 inches.
• Weight: unit 23.1 lbs. boxed 25 lbs.
• UL maximum recommended per outlet 1500W.
• This inverter requires 2 sets of 4/0 AWT cable if you are going to run at 10000 watts.